WiFi Range Extender
  • Item No. : PROEXT2
  • Product Name : Wifi Signal Range Extender for DJI Phantom 4 Black Edition
Description :
ARGtek-PROEXT2BLACK

The high gain 7dBi 2.4GHz panel antennas/ 8dBi Dual Band Omni 2.4GHz/5.8GHz antenna in this kit have been customized for Lightbridge system.
(if you need 2.4GHz antenna for P3 Standard use, please contact us! P4/P3 Pro, advanced use Lightbridge System for LIVE VIEW/APP, P3 Standard use WiFi )
Features :
DJI Phantom 4 Black Edition WiFi Signal Range Extender Antenna Kit

Why Omni? Why Panel?
You might need to switch between the panels and the Omni-directional antenna when you need film in closer around the buildings. The panels are great for distance but are very directional.
Using Omni-Directional antennas can get better performance when you are flying using DJI "Intelligent Flight Mode- Follow Me, Course Lock, Way Points, Home Lock, Point of Interest"
Having both antennas in the kit is your best choice!

  • Two customized high-gain 2.4GHz-2.591GHz 7dBi panel antenna (custom antenna for DJI Light Bridge Use , get the best performance).
  • Two customized high-gain 2.4GHz/2.591GHz Dual Band 8dBi Omni-directional antenna (custom antenna for DJI Light Bridge Use , get the best performance).
  • 2x Custom RC cable.
  • Lightweight, durable, practical and convenient to use in compact design.
  • Increases range from approx. 2.5 Km to up to 7.5 Km (actual results vary with environment).
  • Easy install, no need to drill the remote control or drone, avoid out of warranty.
  • Enable full 32 CH chose high channel to get the least interference.
 
Specification :
The tip for extend the range :
You should install a firmware update to increase your channels to 32 channels prior to installation. (Higher channels have less WiFi interference and our antenna was customized for DJI 's light bridge system)

The high gain 7dBi panel antennas in this kit have been customized for extended WiFi spectrum. Normally, WiFi only operates on 2.4GHz. Our panels have extended frequencies up to 2.591GHz. The kit will work if you do not update the firmware still, however if you update the software to unlock the rest of the channels on your DJI drone, you will be able to use all 32 channels. (DJI only opens 8 channels). Chose 20CH-25CH, our panel antennas work best on CH 22 however they will work on the other channels also.

In youtube, you can find the software videos by searching "Hot to ennable 32CH from DJI"

This item is for the DJI Phantom 4 Black Edition